Build your battery system around the Renogy Pro 12V Smart LiFePO4 Battery range, with 100Ah and 200Ah capacity options, Bluetooth connectivity and self-heating. Choose a single battery, a multi-battery pack or an available accessory bundle to suit your installation.

From an RV weekend to a cabin stay, checking your battery status from a compatible device helps you plan energy use without guessing. Select the capacity that fits your loads and follow the selected model's installation and charging requirements.

Choose Your Battery & Bundle

• Capacity: 100Ah or 200Ah.
• Pack options: One battery, two batteries or four batteries, according to the available combination.
• Accessory bundles: One battery with mounting brackets, or one battery with Renogy ONE Core.

Capacity is stated per battery. Included accessories depend on the selected variant. The detailed information and reference images supplied below primarily describe the 200Ah model; do not apply its limits automatically to the 100Ah option.

Smart Monitoring & Cold-Weather Charging

The range is listed with Bluetooth and self-heating. The supplied 200Ah information supports communication with the DC Home app, Renogy ONE M1 and Renogy ONE Core, plus over-the-air updates through the app when available.

For the 200Ah model, self-heating requires a stable charging current greater than 6A per battery. The listed activation temperature is below 41°F (5°C), with heating stopping above 50°F (10°C). Use a compatible charger and follow temperature protections; self-heating does not permit charging outside the model's approved conditions.

200Ah Model Features & Ratings

• Battery chemistry: Lithium iron phosphate (LiFePO4)
• Voltage designation: 12V
• Capacity: 200Ah
• Cells: Class A EV-grade prismatic cells
• Cycle life: 5,000 cycles at 80% depth of discharge and 80% end-of-life capacity, under the listed 0.5C, 25°C test conditions
• Maximum continuous charging current listed in the supplied FAQ: 100A; choose charging settings according to the manual
• Listed short-duration discharge capability: Up to 270A for 30 seconds, not a continuous rating
• Protection rating: IP67
• Listed corrosion-resistance reference: ISO 9227
• Listed casing flammability classification: UL94 V-0; this is not a claim that the battery is fireproof
• Protection design: BMS with more than 60 protections and alerts, plus active backup protection using self-control fuses
• Connections: Parallel only, up to eight matching batteries; no series connection
• Listed self-discharge rate: Less than 3% per month
• Shelf mode: Does not automatically activate after extended inactivity

Cycle life and runtime depend on load, charging practices and environment. Protection features do not replace correct installation, external circuit protection or safe operation.

200Ah Single-Battery Package

• 1 × Renogy Pro 12V 200Ah LiFePO4 battery
• 2 × M8 × 1.25 × 12mm terminal bolts
• 2 × M8 × 1.25 × 16mm long terminal bolts
• 1 × user manual

This package list applies to the supplied 200Ah battery-only information. Use the selected variant's package details for 100Ah batteries, multi-packs and accessory bundles.

200Ah Installation & Charging Guidance

Install in a clean, cool, well-ventilated location, away from oil and dirt. The supplied guidance permits upright or side installation, but not stacking or upside-down placement. Leave 1.97–3.94 in (50–100mm) above the battery and at least 7.87 in (200mm) on the busbar side, subject to the model-specific manual.

The supplied general operating-environment range is -4°F to 140°F (-20°C to 60°C), with a recommended environment of 59°F to 86°F (15°C to 30°C). This general range is not a substitute for the separate charging, discharging and self-heating temperature limits.

Use a charger compatible with 12V LiFePO4 batteries and the battery's charging parameters. The supplied 200Ah guidance recommends the Renogy 12V 20A AC-DC LFP charger and continuous charger output above 14V for self-heating operation. A charger is not listed in the battery-only contents.

For parallel installations, use matching brand, model, voltage and capacity. Do not mix the 100Ah and 200Ah variants in the same bank. The supplied guidance recommends separately charging batteries, allowing them to rest for 30 minutes and confirming an open-circuit voltage difference below 0.1V before connection, with a further 24-hour period before system connection. It also specifies no more than six months between old and new batteries. Follow the manual's complete balancing and wiring procedure.

The supplied FAQ recommends no more than 80% depth of discharge for cycle-life planning. If under-voltage protection activates, follow the manufacturer's recovery procedure using a matching charger with lithium activation. Do not bypass the battery's protection system.

200Ah Storage Guidance

Store disconnected at 30–50% charge in a dry, clean, ventilated area away from direct sunlight and precipitation, within the listed -13°F to 149°F (-25°C to 65°C) storage range. Avoid impacts or excessive pressure. The supplied guidance recommends recharging at least every three to six months to prevent over-discharge, and fully charging before returning to use.

Existing 200Ah Product Reference Images